|
| ITT Cannon KPT/KPSE |
| A high density circular connector features
lots of contacts and arrangements... qualified to MIL-C-26482
Series I. |
|
|
|
| ITT Cannon Sure-Seal |
| Very inexpensive, fully sealed connector.
1 to 10 circuits. Extremely simple to assemble by hand
or with automated assembly tooling. |
|
|
|
| ITt Cannon CA/MS
Circulars |
| Most widely used circular connector in
the world. Low cost, rugged and extremely versatile. Meets
MIL-C-5015. |
|
|
|
| ITT Cannon Combo-D |
| Combines the functions of several connectors
in one D-sub body. Mix RF, power, high voltage, and signal
circuits in the same connector. |
|
|
|
| ITT Cannon CA-Bayonet |
| A 5015 connector with a quick mating, bayonet
locking device. Sealed to 35 feet of water. Meets MIL-C-5015
& VG 95 234 requirements. Intermateable with VEAM. |
|
|
|
|
|
| ITT Cannon Standard-K |
| The workhorse... reliable, very rugged,
corrosion resistant, lightweight, economical and easy
to use. |
|
|
|
| ITT Cannon Micro
Miniature |
| Very small, high density interconnect with
twist pin contact for demanding digital applications including
medical, instrumentation and satellite systems. Versions
to meet MIL-C-83513 specifications. |
|
|
|
|
|
| ITT Cannon CLC
"Clip" Lock Circular |
| CLC in-line device connectors utilize a
1mm contact system for the smallest sensor interconnect
package with dependable integrity. Provides a low profile
and a tightly sealed, "clip" lock connection
and is easy to install and service. |
|
|
|
|
|
| ITT Cannon APD |
| APD Bayonet locking power connector with
unique lock wire holes for increased security. Originally
designed for heavy-duty transportation and industrial
applications. Features low-cost non-corroding plastic
construction with endbells used with cables, harnesses
or plastic conduits. |
|
|
|
| ITT Cannon PV |
| A highly reliable connector available with
EMI-RFI shielding, qualified to MIL-C-26482 Series II...for
critical industrial applications. |
|
|
|
| ITT Cannon Slide
Lock Circular (SLC) |
| A rugged connector that withstands harsh,
off-road contaminants including oil and antifreeze, and
is environmentally sealed against sand and dust. A cost
effective connector with multiple configurations, common
contacts and installation tooling to improve your cycle
time. |
|
|
|
| ITT Cannon Trident |
| A great 4-48 circuit circular connector
which combines a low cost plastic body with a rugged metal
coupling. Fully sealed to IP67. |
|
|
|
| ITT Cannon Slide
Lock Environmental (SLE) |
| A tightly sealed connector that withstands
harsh environments and protects solid state circuitry.
Features gold-plated stamped contacts, polarization, scoop-proof
design and tool free insertion of contacts. Perfect for
printed circuitboard, black box, cable to cable or bulkhead
applications. |
|
|
|
| ITT Cannon Space/High
Reliability D-Subminiatures (NM/NMB) |
| Designed for the high reliability demands
of satellites, space vehicles and earthbound test equipment
that requires connectors with low residual magnetism,
and rigorous outgassing specifications. Available in styles
with non-corroding gold-plated shells and high-quality
silicone wire seals for crimp contacts. |
|
|
|
| ITT Cannon ARINC
600 |
| ARIINC connectors represent a major milestone
in presenting a new rack and panel connector for support
of the air transportation market. Several important design
concerns have been addressed and solved in this new series.
High mating forces of pluggable modules in a rack have
been reduced by approximately two-thirds. |
|
|
 |
ITT Cannon VEAM CIR |
|
|
| Formerly Litton connectors (or Litton/Veam),
the VEAM CIR connectors have been the worldwide standard for
rail and mass-transit applications for over 30 years. The entire
line is now stocked and assembled by PEI-Genesis: 48-hour assembly,
no minimums, competitive prices, and technical support. |
|
